How to detach the PlayStation four Slim game console model like CUH-2015 or CUH-2115 and other revisions. In add-on, we will clean fan from grit and supervene upon the thermal paste.

PS4 Slim model location: plow the panel over and at the end where the HDMI output is located, your revision of the panel will be indicated a little higher in the recess.

At the cease of the folio, y'all will detect a video instruction on the contrary assembly of the PS4 Slim.

For detach the PS4 Slim, you need two type of screwdrivers: Torx T8 and Phillips PH0.

If any steps of disassembly of the photograph instructions are not articulate, you can sentinel the step-by-step video disassembly beneath.

PS4 Slim disassembly process

The first stride is to remove the hard drive deejay. Remove the panel, it is removed past a slight movement to the side. Next, unscrew the one spiral and removing the hard bulldoze.

PS4-Slim-step-3
Step-3

The next footstep is to remove the warranty sticker.

PS4-Slim-step-4
Stride-iv

After, unscrew one spiral that was behind the sticker by use T8 Torx screwdriver.

PS4-Slim-step-5
Step-5

Now you tin open the bottom case of the ps4 slim. For this pry up on the two corners of instance with your fingers.

PS4-Slim-step-6
Step-6

Remove one spiral using Philips PH0.

PS4-Slim-step-7
Step-7

Plow over the PlayStation 4 Slim and remove the top cover. Information technology is easy; just pry up on the ii corners of case with your fingers.

PS4-Slim-step-8
Step-8

The side by side pace is to remove the power supply of the PS4 slim. Remove the 3 screws with a PH0 screwdriver. Adjacent, using T8 Torx screwdriver unscrew 3 screws and remove the metallic panel. After, disconnect the Wi-Fi antenna from the ability supply.

PS4-Slim-step-9
Step-9

Utilise a plastic opening tool to make infinite between the power supply and example. Afterwards that, elevator up the power supply with your fingers.

PS4-Slim-step-10
Footstep-ten

Disconnect the cable from the power supply and remove the Wi-Fi antenna from the PS4 Slim motherboard.

PS4-Slim-step-11
Step-11

Plough over the game panel and turn off all cables from the motherboard.

PS4-Slim-step-12
Footstep-12

Unscrew 30 screws on the metallic panel (marked by xanthous circles).
Turning off the fan loop (marked by light-green).
Disconnect the second WiFi antenna from the motherboard and unplug the antenna from the metallic panel (marked in reddish).
After, remove the metal plate.

PS4-Slim-step-13
Footstep-thirteen

Remove the two screws and remove the mount (marked with yellowish circles).
Disconnect the 4-pivot connector from the motherboard (marked in red)

PS4-Slim-step-14
Stride-14

Now the PS4 Slim motherboard is available for remove. Lifting it up to remove it from the case.

PS4-Slim-step-15
Stride-xv

Using a napkin, remove the former thermal paste from the surface of the radiator and CPU of PS4 Slim.

PS4-Slim-step-16
Step-16

Now employ a new thermal paste to the CPU. Spread the thermal paste evenly over the entire surface of the CPU.

PS4-Slim-step-17
Step-17

The next step is cleaning the cooling organisation from dust. Flip the PS4 Slim over and unscrew ii screws with a HP0 screwdriver on metallic panel.

PS4-Slim-step-18
Pace-18

Plow over the panel back and unscrew the one spiral.

PS4-Slim-step-19
Step-19

Now lift up the metal console. On the back of this panel is located radiator. Clean the radiator from dust with a brush.

PS4-Slim-step-20
Pace-xx

Side by side, make clean the fan from dust, to exercise this, unscrew the two screws and remove the fan from the case.

PS4-Slim-step-21
Step-21

Now the fan can exist cleaning from grit.

PS4-Slim-step-22
Step-22

Well, that is all, PS4 Slim completely disassembled. Now you can get to the video on the reassembly of the PlayStation 4 Slim.


How to assemble PS4 Slim

Full general assembly steps

  1. Gear up back into the case PS4 Slim fan and fasten two spiral.
  2. Install the metal panel with a heatsink into the case of the game console and fasten ane screw.
  3. Turn the PS4 Slim panel instance over and fasten 2 long screws.
  4. Turn the console dorsum over and install a small atomic number 26 socket.
  5. Install a PS4 Slim motherboard, earlier you check that all thermal pads are in place.
  6. Connect the 4-pivot cable to the motherboard.
  7. Install the metal panel and evenly spike the two bolts.
  8. Check all thermal pads on the memory chips and install metal panel on top of the motherboard.
  9. Now spike all 30 screws on the metal console.
  10. Connect the fan cablevision to the motherboard.
  11. Connect four cables to the motherboard.
  12. Connect the Wi-Fi antenna to the motherboard.
  13. Turn over the PS4 Slim panel and connect the 2nd Wi-Fi antenna to the motherboard.
  14. Connect the iv-pin cablevision to the ability supply.
  15. Now install the power supply in the console case.
  16. Install the Wi-Fi antenna to the ability supply case and ready it with a screw.
  17. Screw the two screws on the PS4 Slim ability supply housing.
  18. Plough over the PS4 Slim console and fasten one more screw on the backside which also fixes the console power supply unit.
  19. Install the meridian plastic embrace on the PS4 Slim case.
  20. Turn the console over and install the metal socket on the case of the ability supply.
  21. Using a Torx T8 screwdriver, spike the three screws.
  22. Now install the 2d plastic case cover PS4 Slim.
  23. Screw 1 spiral from the end of the console case.
  24. Install the hard drive and spike one spiral.